Used 4 times, Last modified on 3 Apr, 2014

Drilled Shaft / Caisson Audit

There are no items to show. To add items (questions), add a category first.

FALL PROTECTION
1 - Fall Protection
— Hazard
2 - Fall Protection
— Protection
3 - Fall Protection
— Equipment
4 - Fall Protection
— Anchor / Tie off
5 - Fall Protection
— Body harness & Lanyards
6 - Fall Protection
— Prevantable maintance
DRILL RIG(S)
1 - Drill Rigs
— Daily Inspections
2 - Drill Rigs
— Properly Setup
3 - Drill Rigs
— Operators Manual
4 - Drill Rigs
— Swing Radius/ Barricades
5 - Drill Rigs
— Properly maintained
CRANE(S)
1 - Cranes
— Daily Inspections
2 - Cranes
— Properly Setup
3 - Cranes
— Operators Manual
4 - Cranes
— Swing Radius/ Barricades
5 - Cranes
— Properly maintained
6 - Cranes
— Load rating, boom angle indicator, fire extinguisher
7 - Cranes
— Attachments (Drilling, Vib. Hammer, ACP)
HEAVY EQUIPMENT
1 - Heavy Equipment
— Daily Inspections
2 - Heavy Equipment
— Backup alarms
3 - Heavy Equipment
— Qualified Operator
4 - Heavy Equipment
— Swing Radius/ Barricades
5 - Heavy Equipment
— Properly maintained
6 - Heavy Equipment
— Equipment aware
RIGGING
1 - Rigging
— Nylon Slings (REMOVE if Stitches are ripped, core shows, cuts, etc…)
2 - Rigging
— Shackles
3 - Rigging
— Wire rope slings (REMOVE broken wires: 10 / 1 Lay or 5/1 strand or 2 in eye)
4 - Rigging
— Spreaders
5 - Rigging
— Hooks (REMOVE if bent, twisted, excessively worn, welded on, pitted)
6 - Rigging
— Turnbuckles